|
Description:
CEC’s 4-123 Vibration
Transducers are particularly suited to turbine
applications. They operate to +260°C,
have low sensitivity to transverse accelerations,
and can be mounted in any plane. The low impedance,
high level output requires no special amplifiers,
simplifying your measurement system. Precision
jewel bearings provide nearly friction-free
movement for long life reliability.
CEC’s 4-123 Vibration
Transducers use a seismic mass that moves
on a special bearing mechanism. A coil is
attached to the case, and movement between
the magnet and coil produces the output signal
when the case vibrates. This air damped system
operates above its natural frequency. The
AC mV output is proportional to velocity.
The sealed case provides protection from contamination.
|
