| CCATS |
- Industry exclusive: Manual Operation
Module (optional)
- Programmable filtering, including tracking
and sweep operations
- Simultaneous tracking and sweep operations
- Up to 14 independent input channels
|
- Engine test cell monitoring
- Testing of generators, pumps, compressors,
turbo-expanders and other rotating equipment
- R&D lab analysis and testing
- Continuous on-line monitoring of rotating
equipment
|
| 2700 Precision
Signal Source |
- Differential or single-ended charge output
- Low impedance AC or DC millivolt output
- Average, RMS, or Peak units
- Four-digit LCD readout
- Operates with AC or battery power
|
- Vibration Monitoring System
- Test Cell Instrumentation
- Field Test Systems
- Test Engineering and R & D Facilities
- Control Instrumentation
|
| 1-157 Portable
Meter |
- Portable Vibration Meter indicating peak-to-peak
displacement and average velocity
- Six selectable inputs
- Optional AC or DC power
- Three internal test circuits
|
- Laboratory or Field Vibration Measurements
- Industrial Turbines
- Power Generators and Gas Pumping Systems
- Paper Mills
|
| 1-808 Vibration
Transmitter |
- Calibrated 4-20 mA output proportional
to transducer input
- Buffered output
- Includes two filters
- Signal / Cable monitoring
|
- Industrial Turbines
- Remote machinery monitoring
- Turbine-driven power generators
- Gas transmission compressors
|
| 1-809 Vibration
Monitor and Transmitter |
- Dual Programmable Alarms
- 4-20 mA Output
- Selectable Filtering
- Buffered Vibration Output
- Three-way Isolation
|
- Turbochargers
- Generators
- Industrial Fans & Blowers
- Compressors
|
| 1-818 Vibration
Transmitter |
- Three-way isolation
- Calibrated 4-20 mA output proportional
to transducer input
- Buffered output
- Includes high-pass and low-pass filters
- Signal / Cable monitoring
|
- Remote machinery monitoring
- Turbine-driven power generators
- Gas transmission compressors
- Test cell environment
|
| 1-895 Vibration
Switch |
- Dual Alarms
- Easy alarm setup
- 3-digit LCD display
- Start-up trip delay (30 seconds),
prevents false alarms
- Alarm trip delays (3 seconds),
filters out transients
- 4-20 mA output
- LED alarm indication
- Remote alarm reset input
- Remote start input
- Displacement or Velocity
response
|
- Industrial Fans
- Compressors
- Centrifugal Pumps
- Motors
- Cooling Towers
|
| 1-310 Charge
Amplifier |
|
- Engine Test Cells
- Calibration Laboritory
|
